Accelerated Hydrogen Peroxide (AHP) Indicator Test Strips are easy to use dip-and-read reagent strips for a pass or fail determination

For use with 2% AHP High Level Disinfectants (HLD5)

HOW TO USE

• Dip the strip into the test solution for one second, making sure that the reagent pad is fully wet.
• Gently shake off the excess solution. Wait for 60 seconds then compare the
  colour on the reagent pad with the reference colour block.
  
• If the colour on the reagent pad is lighter than the reference colour block for a “PASS”, then the concentration of hydrogen peroxide is below the minimum recommended
  concentration for the AHP solution and should be discarded.
• “FAIL” colour blocks are provided only for reference and should not be used for measuring or quantifying the
  level of hydrogen peroxide in the AHP solution.

STORAGE

Store the Accelerated Hydrogen Peroxide Indicator Test Strips at room temperature between 59ºF and 86ºF (15ºC–30ºC). Do not expose the strip to direct sun light.

Important Precautions
Keep the strip in the original container. Remove only the required strip before testing and immediately replace the cap tightly. Exposure of the uncovered strip to light and moisture may cause discoloration of the strip. Do not use the strip after the expiration date (opened or unopened).

Do not touch the reagent pad with finger or any other surface.

Once opened the test kits have a shelf life of 6 months.

Unopened test kits have an 12 month shelf life.

🚚 Same-day fulfillment when order placed by 5pm ET (excludes weekends, holidays)